Client mode tab - JACE-9000
The Client Mode tab provides properties for configuring the JACE-9000 Wi-Fi in Client mode.
Client Configuration group
The Client Mode tab displays configuration properties in a Client Configuration group and network management tools in separate discovery and database tables.
The following images and tables describe the different properties available in the Client mode tab of the Wi-Fi Configuration
| Property | Value | Description |
|---|---|---|
| Status | read only text | Shows current Client mode state: Running, Not Running, etc. |
| Adapter Name | read only text | Name of the client Wi-Fi adapter |
| MAC Address | read only text | Client MAC address, if connected. "Unknown" if not connected. |
| IPv4 Address | read only IP address | Client IP address, if connected. "Unknown" if not connected. |
| Default Gateway Switching | check box (enabled, disabled) | When checkbox is selected, Wi-Fi is the preferred interface used for routing (as a default gateway) when multiple adapters in use. CAUTION: When connecting to a third party access point (such as Cisco), the gateway changes to whatever is provided by the access point's configuration and this will conflict with your wired LAN settings. Note, this situation does not occur when connecting to a JACE access point.When disabled (not checked), keep the gateway as assigned in TCP/IP Configuration view |
Network Discovery and Network Database groups
These groups provide the controls and displays for working with Wi-Fi access points. Use the button controls to discover, add, edit, connect and disconnect from reachable access points. The properties and features of this group work similar to typical Niagara network discovery tools.