JACE-9000 Wi-Fi controls and indicators

There are three physical Wi-Fi related items on a JACE-9000 that has Wi-Fi capability: the Wi-Fi button, the Wi-Fi LED, and the Antenna.

Figure 1. JACE-9000 Wi-Fi controls and led indicator light

Wi-Fi button

The Wi-Fi button is located on the controller front panel. The button is functional only when the Wi-Fi service is configured to operate in Controlled Access Point mode. When this mode is active, pressing the button toggles the Access Point state between "Access Point Running" and "Stopped". See JACE-9000 Wi-Fi modes for more details about configuring modes.

Wi-Fi LED indicator light

The Wi-Fi LED is located on the controller front panel. The light blink patterns indicate the status of the Wi-Fi service. The following table shows led color and blink pattern for different states.

Table 1. LED mode and status indicators
Color	Blink pattern	Mode	Status (state)
Green	Blinking (ON: 0.5 sec / OFF: 1.0 sec)	Access Point or Controlled Access Point	Stopped (access point is not running)
Green	ON (not blinking)	Access Point or Controlled Access Point	Running (access point is available)
Green	Blinking (ON: 0.1 sec / OFF: 2 sec)	Access Point or Controlled Access Point	Inactive (no client connected)
Green	Blinking (ON: 0.2 sec / OFF 0.2 sec / ON: 0.2 sec / OFF: 3.0 sec)	Access Point or Controlled Access Point	Wi-Fi Error
Yellow	Blinking (ON: 0.5 sec / OFF: 1.0 sec)	Client	Stopped or Disconnected: Client mode configured but not connected to a wireless network
Yellow	ON (not blinking)	Client	Client mode configured and connected to a wireless network
Yellow	on for 0.1 sec, off for 0.1 sec	Client	Client mode is scanning for an access point. Check status of targeted access point network.
Yellow	Blinking (ON: 0.2 sec / OFF 0.2 sec / ON: 0.2 sec / OFF: 3.0 sec)	Client	Wi-Fi Error

Antenna

The antenna has no user configurable features or displays. It must be installed for proper Wi-Fi operation. It is attached to the bottom of the JACE-9000 unit and is adjustable by hand. No tools are required for installation or adjustment.