Example conversion steps

Figure 18.   Example “Set enable runtime profiles” step

Figure 19.   Example “Install station” step (pick migrated station)

As shown above, by default all items are selected. If necessary you can de-select any items not wanted.

Figure 20.   Example platform daemon authentication step (to replace factory platform user)

If this controller was previously provisioned by the AX Supervisor, you may wish to have at least one platform admin user with the prior user name, and possibly prior password (if it was “strong” before). Otherwise, you must update the platform connection Credentials property for this station back in the Supervisor station’s NiagaraNetwork.

An even better practice might be to add another platform user in the JACE that no person uses to make platform connections, but is only referenced back in the N4 Supervisor.