Update Network Settings
Use system shell menu option ‘2’ to access most of the same IP networking options available in the Commissioning Wizard step
“TCP/IP configuration”. When selected, you are prompted for each setting sequentially, starting with hostname (as shown below).
Use system shell menu option ‘7’ to access the spanning tree protocol (STP) configuration settings to choose either standard or daisy chain network link mode. Selecting option 7 opens the following window:
Figure 22. System shell STP Configuration Utility
NOTE: If you intend to use the secondary Ethernet port on the Edge device you must first configure the device for Standard network link mode.
Standard link mode
The following example shows the system shell network settings for the standard link mode
Figure 23. Example: System shell with network settings for Standard Link Mode
Daisy Chain link mode
The following example shows the system shell network settings for the daisy chain mode. This is the default network mode for the device.
NOTE: If set up for Daisy Chain Mode, you cannot configure the secondary adapter, as shown below.
Figure 24. Example: System shell with network settings for Daisy Chain Mode
Update System Time"
If the commissioning process hasn't been completed yet, it is often important to set the current date and time (YYYYMMDDHHMM.ss). For example: 201510231536 for 23-Oct-2015 at 3:36pm UTC or 11:36 EDT.