ndriver-NDeviceUxManager
This component is the top-level container component for an AbstractMqttDriverNetwork in a station.
This component is located in the abstractMqttDriver palette. Like other drivers, you should install this component under the Drivers node of a station. The default view of this component is the Mqtt Client Driver Device Manager view where you can add new devices, remove or edit devices in a tabular layout.
To access these properties, expand , right-click AbstractMqttDriverNetwork and click, .
| Property | Value | Description |
|---|---|---|
| Status | read-only | Reports the condition of the entity
or process at last polling. {ok} indicates that the component is licensed and polling successfully. {down} indicates that the last check was unsuccessful, perhaps because of an incorrect property, or possibly loss of network connection. {disabled} indicates that the Enable property is set to false. {fault} indicates another problem. Refer to Fault Cause for more information. |
| Enabled | true or false | Activates (true)
and deactivates (false) use of the object (network,
device, point, component, table, schedule, descriptor, etc.). |
| Fault Cause | read-only | Indicates the reason why a
system object (network, device, component, extension, etc.) is not
working (in fault). This property is empty unless a fault exists. |
| Health | read-only | Reports the status of the network,
device or component. This advisory information, including a time stamp,
can help you recognize and troubleshoot problems but it provides no
direct management controls. The Niagara Drivers Guide documents the these properties. These properties are documented in the Niagara Drivers Guide. |
| Alarm source info | additional properties | Contains a set of properties
for configuring and routing alarms when this component is the alarm
source. For property descriptions, refer to the Niagara Alarms Guide These properties are documented in the Niagara Alarms Guide. |
| Monitor | additional properties | Configures a network's ping mechanism,
which verifies network health. This includes verifying the health
of all connected objects (typically, devices) by pinging each device
at a repeated interval. The Niagara Drivers Guide documents these properties. These properties are documented in the Niagara Drivers Guide. |
| Tuning Policies | additional properties | Selects a network tuning policy by name. This policy defines stale time and minimum and maximum update times. During polling, the system uses the tuning policy to evaluate both write requests and the acceptability (freshness) of read requests. These properties are documented in the Niagara Drivers Guide. |
| Poll Scheduler | additional properties | Enables (true) and disables (false) polling. In history views: true enables a system user to use the Live Updates (play) button in History views to poll for live data for the associated imported history(ies). false renders this button unavailable in history views for the associated imported history(ies). In networks: true polls all associated proxy points and devices that can be polled under the network component or, for a BacnetPoll, under that BacnetStack, Network, and Port. false suspends polling and further value updates from polling do not occur. Note: Poll Service actions Enable and Disable allow access to this property. These properties are documented in the Niagara Drivers Guide. |