Installing the .p12 certificate
The display requires the server certificate to make a secure connection to the station.
Prerequisites: Your display is charged and ready to use. Your network router is within range so that the display can connect
to it using WiFi.
- Save the .p12 certificate to a USB thumb drive or MicroSD card.The USB adapter comes with the display unit.
- Use the adapter to connect the USB thumb drive to the display’s mini-USB connector or insert the MicroSD card.
- Turn on the display (the on/off button is the small button to the right of the mini–USB receptacle on one end of the display).A start-up splash screen opens followed by a screen with this instruction: TAP HERE FOR SETTINGS as the device connects to your local area network.
- Tap TAP HERE FOR SETTINGS.The display finds the certificate on the thumb drive or MicroSD card, imports it and opens the Certificate Auth window.
If, for any reason, you need to return to the first screen that reads, TAP HERE FOR SETTINGS, press the on/off button, and select
Restart. - Using the onscreen keypad, enter the password you created when you exported the certificate using OpenSSL and tap SAVE CERTIFICATE.The Networks and Content Sources view opens.
On the left, under “Sources visible on current network” is the list of devices that are connected to your network.
- Using the IP address of the remote controller station, scroll down the list on the left, find the controller and tap the blue,
right-pointing arrow.The controller appears under the “Display Content in Kiosk Mode” list.
The display supports only one source at a time. If more than one source appears in the list on the right, swipe to the left over the source you do not need. This exposes a delete option (white X on a red square). Tap this X to delete the extra option.
- Expand the source by tapping the down arrow and tap to turn on
Use https.This enables secure communication between the display and controller station. - To preview the connection, tap PREVIEW.
- Assuming the connection works as expected, tap LAUNCH.The display connects to the controller station using certificate authentication.
- In the browser, select
Log in with SSOusing the user you created in the station.You do not need to input a password as the display recognizes the certificate you installed. The display automatically logs in using this user each time it reboots.