BacnetAwsNetwork
This component is the base container for all BACnet components (devices and proxy points). It resides under the station’s
Drivers container. Its default view is the Bacnet Aws Device Manager. In addition to devices and proxy points, this component contains the station’s BACnet communications protocol stack (Bacnet
Comm), and a Local Bacnet Aws Device, which configures the station’s representation as a BACnet device.
The driver supports only one BACnet network component in a station regardless of how many different BACnet link-layer protocols are being used.
Figure 149. BacnetAwsNetwork Property Sheet
To access these properties, expand Drivers double-click the BacnetAwsNetwork and click, drop-down view menu and select AX Property Sheet
In addition to the common properties (Status, Enabled, Health and Fault Cause), this component has these properties.
| Property | Value | Description |
|---|---|---|
| Alarm Source Info | additional properties |
Contains a set of properties for configuring and routing alarms when this component is the alarm source.
For property descriptions, refer to the Niagara Alarms Guide |
| Monitor | ping monitor |
Configures a network's ping mechanism, which verifies network health. This includes verifying the health of all connected
objects (typically, devices) by pinging each device at a repeated interval.
The Niagara Drivers Guide documents these properties. |
| History Policies | additional properties |
Configures the history network extension, which is documented in a separate topic.
|
| Bacnet Comm | additional properties |
Contains BACnet communication properties, which are documented in a separate topic.
|
| Local Device | additional properties |
Contains device properties, which are documented in a separate topic.
|
| Tuning Policies | additional properties |
Configures network rules for evaluating both write requests to writable proxy points as well as the acceptable freshness of
read requests.
For more information, refer to the Niagara Drivers Guide. |