Maxpro Camera (maxpro-MaxproCamera)

The Maxpro camera component configures camera properties.

In addition to the standard properties (Status through Preset Text), these properties are unique to the Maxpro camera.

Property	Value	Description
Use Rtsp Stream	`true` (default) or `false`	Turns RTSP (Real Time Streaming Protocol) on and off. This protocol controls a camera using DVD-style controls (play, pause, etc.) CAUTION: RTSP does not support TLS secure communication. Using this protocol may open your video network to be hacked. `true` enables RSTP streaming. `false` enables standard video streams at the camera, typically: H264 or MPEG4.
Rtsp Stream Url	read-only	Displays the camera’s URL sent by the NVR.
Use Custom RTSP Url	`true` or `false` (default)	Enables (`true`) (the use of a custom RTSP URL other than the URL returned by the NVR for this camera. If you are using a custom URL for RTSP streaming, make sure that the URL results in the RTSP video streaming. If this URL is from NVR, make sure that the URL/channel is open on the NVR side to receive video frames from the custom RTSP URL. `false` enables HPS streaming.
Custom Rtsp Stream Url	URL	Identifies the custom URL to stream RTSP for the camera. The driver uses this URL if `Use Custom RTSP URL` is set to `true`.
Control Port	number (defaults to 554)	Identifies the control port for RTSP streaming.
Data Port	number (defaults to 9000)	Identifies the port used to receive RTSP data. (Could be any port.)