- In
Workbench, open the M2M JACE station.
- Expand the station’s Config space to see its Drivers folder, and double-click it for the Driver Manager view. If an M2mIoNetwork is already there, verify it is enabled (status “ok”), and go to Step 5.
- Open the nrio palette from the palette side bar.
- From the nrio palette, drag an M2mIoNetwork into the station’s Drivers folder. In the popup Name dialog box, you can rename the network—or, simply use the default name.
An M2mIoNetwork named M2mIoNetwork (or whatever you named it), is now under your Drivers folder. As copied from the palette, the M2mIoNetwork includes a child Nrio16Module named LocalIo16.
- Double-click the M2mIoNetwork to open its Nrio Device Manager view and begin discovery.
NOTE: If the station is running, within seconds the previous copy triggers a discover job, and the LocalIo16 Nrio16Module dynamically acquires its address and UID. At this point, its status should be “ok”. If the LocalIo16 Nrio16Module remains in fault, go to its property sheet and look at the Fault Cause property.
- Click to select all discovered Nrio16Modules, then click the Add button.
The Add dialog box appears, in which you can enter a Description for each one, or edit that later.
- Click OK to add the Nrio16Module(s) to your station.
Once the discovered modules are added, you can proceed to create Nrio proxy points.