Double-click a ComponentTag for its property sheet (Figure 45).
ComponentTag properties are described as follows:
-
Status
Read-only status of the export tag, typically “ok”, unless “disabled” (Enabled=false).
-
Enabled
Whether the tag will attempt an export on the next Join (true, the default) or not (false).
-
Supervisor Station
Click the drop-down
control to select the NiagaraStation that represents the Supervisor (with enabled JoinProfile).
After selection, you must before you can use the 
folder (Select Parent Target) feature of the next property. Also, add 
(and delete 
) controls exist to specify more than one Supervisor station; however, this configuration is rarely expected.
-
Station Slot Path
Parent slot path for the replicated component on the Supervisor, relative to the NiagaraStation that represents this station. If multiple Supervisor stations, this applies only to the first (top) one.
-
You can manually type a path, to create corresponding folders under the NiagaraStation (that represents this JACE) on the Supervisor. This includes use of “BFormat”
%value%options.The default “slot:” puts the component in the root of the NiagaraStation.See Station Slot Path considerations and BFormat options in Station Slot Paths.
-
Or, click the
folder for a Select Parent Target dialog, and navigate to the desired folder or container. In this case, you must have already made (and saved) the needed
folders in the JACE’s station “profile.bog” file.
You can edit the “profile.bog file” to add folders—see Verify and edit the Station (.bog) File for details.
-