Snmp Device Manager
Use the Snmp Device Manager to create, edit, and view bothSnmpDevice and SnmpAgent under a SnmpNetwork. The Snmp Device Manager is the default view on the SnmpNetwork
Figure 2. Snmp Device Manager view
To access this view, expand and right —click ..
Columns
| Column | Description |
|---|---|
| Name | Displays the name of the device. |
| Exts | Provides extension hyperlinks, including: Points, Alarms, Schedules, Trend Logs and Config. |
| Status | Reports the current condition of the entity as of the last refresh: {alarm}, {disabled}, {down}, {fault}, {ok}, {stale}, {unackedAlarm} |
| Enabled | Indicates if the network, device, point or component is active or inactive. |
| Health | Reports the status of the network, device or component. This advisory information, including a time stamp, can help you recognize and troubleshoot problems but it provides no direct management controls. |
| Poll Frequency | Displays the polling frequency. |
| Snmp Version | Displays the Snmp version whether it is Snmp V1 or Snmp V2 |
| IP Address | Reports the IP address of the device. |
| Port | Displays the port to use for outgoing Snmp requests to the corresponding Snmp device for this SnmpDevice. |
| Community | Displays the community string field to use for outgoing Snmp request messages sent to the SnmpDevice. |
| Max Variable Binding Per Request | Displays the variable bindings to include in each Snmp request message sent to the Snmp device. |
| Retry Count | Displays the number of times any individual Snmp request made to this SnmpDevice will be retried when receiving a null response before considering the request to be a communication failure. |
| Response Timeout | Displays the maximum amount of time to wait for a response after sending an Snmp request to this SnmpDevice |
Buttons
- New Folder creates a new folder for devices. Each such folder provides its own set of manager views.
- New creates a new device record in the database.
- Edit opens the device’s database record for updating.
- Template Config accesses the station template that defines configuration options. You would select a template to set up the device with pre-configured properties.