kitLon-LonTime
This component provides the ability to link system time from the station to any Lon device that has an nvi using SnvtTimeStamp.
You drag or copy this component from the kitLon palette to the Lon network, then link it on the wire sheet to one or more Lon device(s).
Figure 51. Lon Time Property Sheet
To access these properties, right-click LonNetwork and click , then expand LonTime.
In addition to the standard properties (Status and Fault Cause) there properties are unique to this component.
| Property | Value | Description |
|---|---|---|
| Update Time | hours minutes seconds (defaults to 10 seconds) |
Sets the frequency with which the driver updates the time.
|
| Time Stamp | additional properties: year, month, day, hour |
Reports the date and time the event occurred.
Refer to Time Stamp. |
Time Stamp
| Property | Value | Description |
|---|---|---|
| Nv Props | additional properties |
Reports and configures NV (Network Variable) input properties.
For property descriptions, refer to lonworks-LocalNv. |
| Nv Config Data | additional properties |
Maps directly to a device’s network variable and reports NV (Network Variable) output configuration data.
For property descriptions, refer to lonworks-LocalNv. |
| year | defaults to current computer’s year | Sets up the year. |
| month | defaults to current computer’s month | Sets up the month. |
| day | defaults to current computer’s day | Sets up the day. |
| hour | defaults to current computer’s hour | Sets up the hour. |
| minute | defaults to current computer’s minute | Sets up the minute. |
| second | defaults to current computer’s second | Sets up the second. |